A dashcam, or a car DVR, is a recording device installed on a vehicle’s dashboard to record videos while driving. This device’s basic feature is to record special moments and astonishing views that we encounter while visiting any desired location. 

Imagine going on a long drive someday only to realize the dash cam isn’t capturing those unforgettable moments. Well, this is a common issue many individuals face, and the reason is technical glitches. 

In this article, we will provide detailed yet straightforward information regarding how to reset a dashcam. The instructions are easy to follow, ensuring that even new dash cam users can solve their issues in seconds. So, let’s get started without further delay.

How do you reset Dash Cam to the default settings? 

 

 

Now, with everything being said, you must be curious about the procedure for resetting the dash cam to its default settings. The simple steps below will assist you in getting your job done.

Step 1: Turn Off Your Dash Cam

Keep the lens covered, which eventually means the camera is off. To understand it better, make sure the red light on the camera is no longer on.

Step 2: Remove The Battery

After the dash cam is off, remove the battery. To perform this task, you have to remove the back cover of your dash cam and then proceed.

Step 3: Tap and Hold The Reset Button For 5 Seconds

Hold the REC + MIC Buttons simultaneously until the device beeps. This will allow the dash cam to restart, reverting to default. For some models, you must hold the WIFI + REC buttons to continue the process. 

Step 4: Insert The Battery And Tap On Power Button

After the reset process, insert the battery into your dash cam. Next, tap the power button to turn on the device. You’ll see the welcome board on the screen as it boots up. 

Hence, you have successfully reset your dash cam to its default settings.

How To Fix A Blocked Dash Cam?

There may be many reasons for a blocked dash cam. If you face issues turning on your dashcam, try the following steps.

1. Initially, start by taking off the SD card.

2. Attach your dash camera to a socket using a USB cable. If it starts recording right after resetting, shut it off by pressing the power button or removing the battery. 

3. You will need the original 5V car charger to charge the dash cam. After charging, it should be ready to go.

4. Next, turn it on and monitor the device’s behaviour during the booting process.

5. Don’t lose hope if your dash cam still refuses to restart. It’s time to check your adapter to see if it’s still working.

6. Another major issue that often goes overlooked is the cable connection. Take a moment to carefully inspect the cable running from your dash cam to its power source.

7. If the above steps don’t work, consider restoring your dash camera to factory settings.

How To Fix A Frozen Dash Cam Screen?

There may be instances when the dash cam gets stuck on a certain display. If you encounter such issues, you can try the steps below to fix your device.

1. Tap on the reset/restart button of your dash camera.

2. Take a moment to pause. This will allow the device to reset its default settings and clear any temporary glitches that may have been causing problems.

3. Look closely at the cigarette lighter socket for signs of damage, such as loose connections.

4. After resolving the issues, reconnect the plug.

5. After performing the above-mentioned steps, look for the Screen Saver feature. This feature turns off the display after a certain period of inactivity, helping conserve battery life and prevent screen burn-in.

How to Reset Thinkware Dash Cam?

Resetting your Thinkware dash cam is straightforward. 

Step 1—Press the MIC + Middle Button ( a Manual Record Button) simultaneously for at least 10 seconds and then release.

Step 2—You will hear a beep and an automated message. This ensures that your dash cam has been reset to factory settings. 

Final Thoughts

In conclusion, the information provided in this article will greatly help you reset your dashcam. Whether you are troubleshooting an issue or want to format your device, this process ensures that it is restored to its default settings.

If you still encounter issues, let us know in the comment section below. 

Leave a Reply

Your email address will not be published. Required fields are marked *